The DMV Vented Scleral Cup™ is most commonly used for the insertion of scleral lenses, hybrid lenses, soft contact lenses, and prosthetic eyes. Unlike the DMV Scleral Cup, this product is vented all the way through to prevent any suction.
Follow lens preparation instructions provided by your eye care practitioner and lens manufacturer. Place the lens in the DMV Vented Scleral Cup front side down. Fill the lens with contact lens solution approved by your eye care practitioner. Tuck your chin to your chest and lean forward. While looking straight down in to a mirror placed flat on the horizontal surface in front of you, retract the upper and lower lines and lift the lens gently onto the cornea. A few drops of solution should drip from the eye during insertion. If bubbles appear under then lens after insertion, remove the lens and re-insert.
Do not use this product with diseased, injured or otherwise compromised eyes.
Keep this product and its case away from small children.
This product contains natural rubber latex which may cause allergic reactions. Antigenic proteins in the dry natural rubber are found by independent laboratory testing to be below detection. Research data on file at DMV corporation.
Cleaning and care
Wash the Vented Scleral Cup frequently in warm soapy water and allow to air dry. Do not use this product with soft contact lenses.